Capabilities
Production capabilities | |||
Product type | single/double/multilayer 3~24 layers | ||
raw material | Fr4 boards, Rogers boards, Aluminum boards and High frequency boards | ||
surface treatment | HASL, HASL LF, OSP, Immersion gold, Gold plating(surface treatment gold thickness≥1 U")") | ||
Board Thickness range | FR4,0.40-2.4mm(0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4) | ||
Board Thickness tolerance | T≥1.0mm±10%;T<1.0mm±0.10mm | ||
Max size | 450x1200mm | ||
Dimension Tolerance | ±0.20mm | ||
Minimum line width / spacing | 5mil/5mil | ||
Through-hole pads (unilateral) | ≥6mil | ||
Line Width / spacing Tolerance | ±20%mm | ||
Finished copper thickness | outer 35-150um;inner≥17um | ||
Hole copper thickness | ≥18um | ||
Mechanical drilling range | 0.25-6.30mm(>0.80mm Metallization slot0.65mm Non-metallic slot0.80mm | ||
Minimum groove cutter(slot) | Metallization slot0.65mm,Non-metallic slot0.80mm | ||
Hole size tolerance | NPTH hole:Hole size<0.8mm:±0.05mm;0.81-1.80mm:±0.08mm;1.8-5.0mm:±0.10mm PTH Hole:Hole size<0.8mm:±0.08mm;0.81-1.80mm:±0.10mm;1.8-5.0mm:±0.127mm VIA孔:+0.08mm,Negative tolerance is not required | ||
solder mask type | Photosensitive oil (ink colors: green, blue, red, white, yellow, black) | ||
silkscreen Requirement | The minimum character height≥0.80mm, The minimum character width≥0.15mm | ||
Board warpage control | SMT boards≤0.75%;Widget boards≤1.5% | ||
the distance between trace and the outline line | Electric milling Scoreboard≥0.30mm,V-CUT Scoreboard≥0.40mm | ||
Semi-hole technology | Minimum Semi-hole size≥0.50mm | ||
V-CUT requirements | V-CUT Parallel direction length≥80mm,maximum V-CUT size 350mm(non-V-CUT direction) | ||
Gold finger board | the entire board for gold plating or immersion gold | ||
Pads plate copper method | We use the reduction of copper (Hatch), the clients who use Pads to design should pay attention | ||
Pads Software Videos slot | If the clients want to open Non-metallic slot inside the boards, pl draw it in the Drill Drawing layer | ||
Protel series software of large-scale trace opening window | Pl design it in the Solder masks layer, a few clients design it in the multil layer, it is easy to cause non-open window phenomenon | ||
The routing of Protel software Series | When the clients use Keepout layer or Mechanical layer,pl notice:There should be only one routing file in one gerber files. That means when you draw route file, you can only choose one of them (Keepout layer or Mechanical layer). If both Keepout layer and Mechanical layer exist, our company will produce base on only Mechanical layer |